SDG Ultrasonic Generators
Generators from the SDG series are compatible with all ultrasonic welding devices from the Easy series and their actuators, as well as the ABW series, lots of special actuators, all cutters and all hand units.
They can be programmed in the dialogue box, have robust housing and are very reliable.
SDG generators can be placed in a multirack to operate up to five module simultaneously with large systems.
Advantages of SDG ultrasonic generators
Softstart and softstop function
To gently augment and attenuate the oscillations of complex horns to protect these from damage.
Part counters – Increase process reliability
A part counter is integrated into all ultrasonic generators from the SDG series.
Air cooling
With continuous use, the generator may require cooling under certain circumstances. A fan has already been integrated into the generator.
Quality control
The SDG ultrasonic generators can be used to set a wide range of limits that issue a warning or stop the machine.
6 welding modes to choose from
Thanks to the welding modes, you can find the right setting for every application, meaning that perfect welding is guaranteed. The following welding modes can be selected on the SDG series:
- Welding time
- Welding energy
- Welding time AND/OR welding energy
- Contact cut-off
- Continuous
Test mode
The TEST button on the generator can be used to trigger the ultrasound for a few seconds. With this, you will find the ideal starting frequency for the ultrasonic process after a change to the oscillator system.
High process reliability
RINCO generators operate very reliably and have a long service life.
Adjustable amplitude
You can change the value for the amplitude between 15% and 100% in 1% increments to achieve the best possible welding or cutting result. An LED bar indicates the power in real time during the welding process.
Status always visible
Thanks to the LEDs on the user interface, you can always see the status of the connected hand unit at the time.
- Green = Ultrasound ready
- Yellow = Ultrasound active
- Red = Error
Power overload
In the event of a power overload, the welding process is aborted to protect the generator and oscillator system.
Trigger – Ultrasonic trigger point
The welding operation can be initiated using a trigger. You can choose from the following triggers:
- Off
- On
- Start
- Time
Save time with no maintenance
Ultrasonic welding generators from the SDG series are maintenance-free and therefore make your company even more productive.
Technical specifications
| SDG | RDG | |
|---|---|---|
 |  | |
| Operating frequency | 20 kHz, 30 kHz, 35 kHz, 40 kHz or 70 kHz | 20 kHz, 30 kHz, 35 kHz, 40 kHz or 70 kHz |
| Power output | 100 W, 200 W, 400 W, 500 W, 750 W, 800 W, 900 W, 1000 W, 1500 W or 2000 W | 100 W, 200 W, 400 W, 500 W, 750 W, 800 W, 900 W, 1000 W, 1500 W or 2000 W |
| Operating modes |
|
|
| Communication and interfaces |
| --- |
| Power supplies | 230 V ± 10 %, 50 / 60 Hz | 230 V ± 10 %, 50 / 60 Hz |
| Amplitude | Adjustable 15 - 100 %, changeable in 1 % increments | Adjustable 40 - 100 %, changeable in 10 % increments |
| Weight | 16 kg | 9.5 kg |
Downloads
Download here our product brochures.
Fields of application
Contact
Think this device might be right for you, but you still have some questions? Please feel free to contact us for more information.
