High-Tech

Iso 9001 certification Iso 13485 certification Iso 14001 certification

Products in the high-tech sector have shorter life cycles than in any other industry. This is why it is important to optimise the production process and keep downtimes to a minimum. However, quality must not suffer as a result. High-tech products move with the times and their design must follow suit. To cope with all this, flexible suppliers and manufacturers of tools and components are needed. With RINCO ULTRASONICS AG on your side, you are choosing a partner who will provide you with expert advice and who guarantees quick delivery. Our machines are durable and inexpensive to maintain, while services and tool changes are carried out in no time at all. Thanks to their modular construction, our ultrasonic welding machines permit a high degree of flexibility. Ultrasonic welding is also a very quick joining technology, which will noticeably reduce your production time. Contact us and we will be happy to advise you on your next project.


Ultrasonic welding machine Electrical Motion 20 kHz Electrical Motion 20
Ultrasonic welding machine electrical bench welder

Ultrasonic Welding Machine Dynamic 3000
Ultrasonic Welding Machine Dynamic 3000

Ultrasonic Welding Machine Dynamic 745
Ultrasonic Welding Machine Dynamic 745

Ultrasonic Welding Machine Standard 3000
Ultrasonic Welding Machine Standard 3000

Ultrasonic Welding Machine Standard 745
Ultrasonic Welding Machine Standard 745

Ultrasonic welding machine Standard 50
Ultrasonic welding machine Standard 50

Ultrasonic Welding Machine Easy 3000
Easy 3000

Ultrasonic Welding Machine Easy 745
Easy 745

Ultrasonic Welding Special Actuator SPA20
Ultrasonic Welding Special Actuator SPA20

Ultrasonic Welding Special Actuator MA35-20
Ultrasonic Welding Special Actuator MA35-20

Ultrasonic Welding Special Actuator SV35 - 35 kHz
SV35-100/50

Special actuator SV35-40
Special actuator SV35-40

Cutting head CH35
Cutting head CH35

Ultrasonic hand cutting unit HC35-4 /-5
Ultrasonic hand cutting unit HC35-4/-5

Ultrasonic welding generator ACU
Ultrasonic welding generator ACU

Ultrasonic welding generator ADG
ADG

Ultrasonic welding generator Ecoline
Ultrasonic welding generator Ecoline 35 kHz

Ultrasonic welding generator RDG
RDG

Ultrasonic welding generator SDG
SDG

Ultrasonic welding generator AGM
AGM

Ultrasonic hand welding unit HW70-3
Ultrasonic hand welding unit HW70-3

Ultrasonic hand welding unit HG70-1
Ultrasonic hand welding unit HG70-1

Ultrasonic hand welding unit HG35-3 /-4
Ultrasonic hand welding unit HG35-3/-4

Ultrasonic hand welding unit HT35-2 /-3
Ultrasonic hand welding unit HT35-2/-3

Ultrasonic hand welding unit HW35-3 /-4
Ultrasonic hand welding unit HW35-3/-4

Ultrasonic hand welding unit HG20-1
HG20-1

Special converters Convertisseurs Ultrasons Spéciaux
Special converters

Standard converters Convertisseurs Ultrasons Standards
Standard converters

Anvils and Horns Enclumes et Sonotrodes
Anvils and Horns

Special Boosters Boosters Spéciaux Ultrasons
Special Boosters

Standard Boosters Boosters Standards Ultrasons
Standard Boosters

Workstation with automatic drawer Station de travail avec alimentation automatique
Workstation with automatic drawer

With our machines and our expertise, you will achieve:

  • A high processing speed
  • Short process cycles
  • Consistent, durable and accurate welding results which can be reproduced
  • Absolute process and quality control by means of recording the parameters
  • A high degree of process reliability
  • Very short maintenance times

Automated welding:

  • Thanks to the modular construction, a manual workstation can be developed into an automation line or integrated in a special purpose machine at any time
  • Controlled and operated by the ultrasonic generator

The advantages of ultrasonic welding technology:

  • Economical, energy-saving, efficient
  • Environmentally friendly
  • No additional connection components

Our tools:

  • Customer-specific; calculated and simulated by FEM
  • Durable and low wear and tear
  • Available in selected materials
  • Quick to replace thanks to the quick-change system

What can be processed and how?

  • Thermoplastics
    • Welding
    • Die-sinking
    • Riveting
    • Bending
    • Punching
    • Sealing
  • Technical textiles & non-woven materials:
    • Cutting
    • Sealing
    • Punching
    • Welding

Particularly suitable for embedding, whereby metals are joined to plastic components

  • No damage to the application
  • No pre-heating of the metal components
  • Simplification of the injection moulding procedure

Which materials can be joined?

  • Amorphous thermoplastics, such as:
    ABS, PS, SAN, PC, PMMA, SB
  • Semi-crystalline thermoplastics, such as:
    PP, PA, POM, PE, PEEK
  • Copolymers
  • (List not exhaustive)